Hyloc Products

Product Details:

• Non pressure and viscosity compensated valves.
• Model TT Throttle valves allow adjustable throttled flow in both the directions.
• Model TCT Throttle check valve gives adjustable flow in one direction and allows free flow in opposite direction

Product Details:

• Cartridge type Shut of valves model KHSL are rising spindle, seat type valves with metal seat for leak-free closure between it's port `A' & `B'.
• The mounting cavity confirms to Factory standard

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

• Tube & pipe clamps are used in installations to provide rigid support to the pipes both in lateral & longitudinal directions releiving stresses caused by unequal movements in the pipe line. The use of clamps will also prevent the transmission of vibrations from the pipe to the frame & vice versa. Loosening of joints , welds & leakage in the system can be avoided by the rigidity provided by the clamps. These are available in Metric Series from Tube o.d. of 6 mm to 38 mm.

Product Details:

• Diagnostic Couplings are intended to provide facility to access system pressure for the purpose of pressure measurement. For transmitting pressure through these couplings to the measuring devices, no special tools are needed. These couplings can be connected by hand even at rated pressure. These couplings are equipped with protective caps to avoid ingress of foreign particles, when the couplings are not in use. This is also a Safety device against vibration. These couplings also can be used for purging air from the system. Working Pressure 630 bar (9000 PSI) according to ISO 15171-2

Product Details:

Product Details:

• Cartridge type Needle valves model KHNL are rising spindle, seat type valves with metal seat for leakfree closure between it's port `A' & `B'.
• The mounting cavity confirms to Factory standard.

Product Details:

• Seat type valve.
• Swivelling gauge connection for easy gauge positioning.
• Compact assembly.
• Eliminates gauge supporting bracket.
• Angular gauge face plane in Sub-plate mounting construction facilitating easy gauge reading.

Product Details:

• The Pressure Gauge Isolator Valve Model Gi Is Meant For Checking The
• System Pressure To Which It Is Connected.
• The Valve Is A Spool Type, Spring Off-set, Manually Operated Device.
• In Normal Condition The Valve Blocks The Pressure Port And Keeps The
• Pressure Gauge Connected To The Drain. Thus Isolating The Gauge From
• System Pressure Surges And Eliminating Continuous Pressure Strain On
• The Gauge.
• By Pushing The Actuator Knob Of The Valve, System Pressure Can Be Read
• On The Gauge.
• The Valve Is Available Either For Mounting On A Sub-plate Or With Threaded
• Ports.
• The Pressure Gauge Can Either Be Directly Mounted On The Valve Or Can
• Be Connected Remotely.

Product Details:

• Seat Type Valve For Isolating Pressure Gauges In The Systems.
• Leakage Free Construction. No Return Line Needed.
• Compact Assembly.
• Valve Can Be Mounted On Vertical As Well As On The Horizontal
• Panel Face.

Product Details:

• Needle Valve Model Nl, Nlw Are Two Way,
• Seat Type Valves.
• These Are Used For Isolating The Oil Flow In
• The Direction As Indicated By An Arrow Mark
• Shown On The Valve Body

Product Details:

• Needle Valve Model Nl, Nlw Are Two Way, Seat Type Valves.
• These Are Used For Isolating The Oil Flow In The Direction As Indicated By An Arrow Mark Shown On The Valve Body

Product Details:

• Shut Off Valve Model Slg, Slwg Are Two Way, Seat Type Valves.
• These Are Used For Isolating The Oil Flow In The Direction As Indicated By An Arrow Mark Shown On The Valve Body.

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details:

Product Details: